There are many different types of dents that can occur as a result of hail damage. The types of dents you see will depend on the shape or contour of the car’s bodywork at the point where the dent occurred.

Each one requires a different method of car hail damage removal treatment to make your car look brand new. Here are the four types of dents caused by that particular phenomenon:

Type 1: Sharp/Angular Dents

These are a common type of dent caused by hail. They occur when a small piece of hail impacts your car at high speed and creates a sharp dent that looks similar to an ice pick hole.

Sharp dents are easy to spot and can be fixed by a professional. They can often be removed by gently hammering out from the back side of the panel until it pops out.

Type 2: Creased Dents

These types of dents are caused when a large piece of hail impacts your car at high speed and folds the bodywork back. This is caused by the force of the impact, which can be quite significant depending on how heavy or fast the hail is moving when it hits your vehicle.

These dents are usually not very deep, but they can be extremely difficult to fix during auto hail dent removal because they have left behind creases in your car’s bodywork that will need to be flattened before it can be painted.

Type 3: Round Dents

These are the most common types of dents, and not just by hail. This is because round dents are more likely to be caused by hard objects that are small in diameter, like stones or pieces of gravel.

When small rocks hit the car as you’re traveling, these create a round impression on the vehicle’s surface. The damage from these dents will usually be quite shallow as well, though it may need to be removed with a hammer if it’s too deep for any other tool. Do not attempt removing dents with heat.

Type 4: Ding Dents

A ding dent is when a small, shallow dent occurs in your car’s bodywork. These are usually caused by hail or other hard objects that are small in diameter.

This type of damage will often be accompanied by dimpling on the surface around the point where the ding is located, as well as a mark where it hit and bounced off. Ding dents are the easiest to remove using a dent removal kit. 

Ask for Professional Help

The dent removal process will vary depending on the type of damage. Some dents can be removed with a special tool while others may require repainting or replacement of parts.

As a rule, you should only attempt to remove dents if they are small and located in areas that can be easily repainted. Be sure to double-check whether a method of dent removal should only be used by an auto shop before you try to do it yourself. 

Some popular techniques, such as using heat to remove dents, are ineffective and may cause further damage to your vehicle. If the car has been damaged in an accident or there is structural damage to the bodywork, have a professional take care of it.

If you’re unsure about whether or not the bodywork has been damaged, you should definitely get professional help. A body shop will be able to tell you what type of damage has occurred and how much repair work is needed.

Get Professional Dent Removal

Sometimes, vehicles are totaled at insurance auctions due to hail damage or cosmetic damage. A professional may be able to successfully salvage the vehicle instead of having it totaled. If you do intend on attempting the dent removal yourself, keep these things in mind.

If you find yourself in this situation, getting a professional’s advice may help you save your car or prevent it from being deemed non-repairable and auctioned off. Investing time to find the right car repair shop will save you thousands of dollars and countless headaches. You’ll thank yourself later. 

Be Sociable, Share!